if its the one that i'm thinking of, the same as the AC lines, Advance
Autoparts has them for ~$2.00 for each size... (had to get them to do my
heater core) i think they are called Spring Press fittings or something
close?
Tim Berry - Chesapeake, VA
97 Dakota CC 360 Auto 4300lbs
best ET to date: 13.03@103.76
355.8RWHP 395.2RWTQ
99 Neon R/T Daily Driver
>
> Yes...you can find the tool at your local auto parts store for about
> $10.00.
>
> (It's a 3/8" line)
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bill
> Urbanovsky
> Sent: Monday, February 24, 2003 8:38 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Fuel line connector
>
>
>
>
> Hello,
>
> 1996 Dakota 3.9 v6. (throttle body)
>
> I am attempting to remove the fuel line where it attaches to the
> injector manifold. I removed the outer clip but there appears to be an
> internal clip of some sort holding the connection together. From
> looking at a manifold that has the line removed it appears that this
> internal clip is made of plastic. Does this reqire a special tool?
>
> Thanks.
>
> Bill
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:52 EST