Maybe I have a problem than. When I get a 1/2 yard of soil mix the back
seems to sag quite a bit.
Jim Nelson
<kenallgood@cox.net> wrote in message
news:20030224165142.JTDM6744.lakemtao02.cox.net@smtp.east.cox.net...
>
> The QC is not made to handle a lot of weight in the bed. I believe most
of them are 1/4 - 1/2 ton payloads. It varies based on the engine size,
gear ratio, and 4x4 or 4x2. Some of the early GenIII Dakotas were a full
ton (I believe the only way to get that was with 5.2L, 3.55 gears, extended
cab and 2wd.. like mine :-) ). Otherwise, most of 'em were right around
3/4 ton or maybe 1900lbs.
>
> Actually, I just checked dodges website.. apparently, I was incorrect
:-) Looks like most of them are around 1,500 payload.. Try this link:
>
> http://www.dodge.com/dakota/index.html?context=homepage&type=top
>
> and click on the towing guide in the bottom middle.. Choose Dakota, then
your configuration. This is for 2003 models, but I think it'll probably be
the same. How much was it sagging? It will start sagging a little when you
get about 1/2 the payload in there (maybe an inch drop), and increase after
that. When you reach the max, it'll probably sag a good bit, but shouldn't
be almost on the ground (BAD!). I've towed probably over 1500lbs in the bed
of my Dakota (97 CC, 5.2L SLT 3.55), and it barely sags. I love getting a
payload of wet mulch and it not even drop 1", while Toyota compacts have the
same load and are just about scrapping the ground.
>
> >
> > From: "James Nelson" <jfnelson@satx.rr.com>
> > Date: 2003/02/24 Mon AM 10:59:00 EST
> > To: dakota-truck-moderator@bent.twistedbits.net
> > Subject: Re: DML: Load Capacity
> >
> >
> > I'm a little confused. According to the current Dodge site the load
capacity
> > is 1780#. My big concern is the fact that I had half of this at 800#
and
> > was having problems
> >
> > Jim Nelson
> >
> >
> >
> >
> >
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:52 EST