Re: RE: Re: changing rotors?

From: DAKSY (rsmith13@nycap.rr.com)
Date: Sun Mar 23 2003 - 14:48:20 EST

Next message: Droo: "Re: FW: After 3 years I'm finally get the truck spray lined!!- UPDATE"
Previous message: Chad Evans: "Re: Re: Re: RE: Porting stock heads (Ray Block)"
In reply to: Vic: "RE: Re: changing rotors?"
Next in thread: Tubamirbls@aol.com: "Re: changing rotors?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hey, Steve,

<snip> You'll need a 6mm Allen wrench for the caliper bolts.<snip>

Better make that a 7mm hex. That's what my 2K DAKSY needed.
I used a socket style that fit my 3/8 ratchet. Also, a little anti-seize
compound on the caliper pin threads when you re-install them will make it
easier the nxt time.
HTH,

Bob Smith (DAKSY2K on AIM)
(Been there....)
Averill Park, NY
2K DAK SY CC Sport + V6 4X4 5 Speed

WebPage URL: http://home.nycap.rr.com/daksy/

Next message: Droo: "Re: FW: After 3 years I'm finally get the truck spray lined!!- UPDATE"
Previous message: Chad Evans: "Re: Re: Re: RE: Porting stock heads (Ray Block)"
In reply to: Vic: "RE: Re: changing rotors?"
Next in thread: Tubamirbls@aol.com: "Re: changing rotors?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:03 EST