Bernd
What would be the most cost effective way of getting a 1.7:1 roller setup?
Thanks
> Hardened pushrods are highly recommended with guideplates...however, if
> you don't plan on twisting the engine past 5000rpm (5200rpm max), you
> don't really need them. 1.7:1 rollers with the stock cam (on most V8's)
> will gain you about 15-18RWHP more. 1.6:1 are good for about 5RWHP with
> the stock cam. Both will allow the engine to spin up quicker due to
> less friction on the valvetrain.
>
> - Bernd
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:05 EST