Hey James looks like you are the go to guy for the Viper fan, What is the
part number and If you wouldn't mind could you e-mail me a copy if the
wiring diagrams also.
Thanks
Vic in Phoenix
92 Spirit R/T
89 CSX
88 CSX-T
87 Shelby Lancer
84 Rampage TII
92 Dakota 4x4
----- Original Message -----
From: <JAMEPC@aol.com>
To: <bpracing@worldnet.att.net>; <aol@dakota-truck.net>
Sent: Friday, April 04, 2003 10:51 AM
Subject: Re: DML: Re: RE: Viper fan is crazy!
>
> I'm installing it on a Gen II. The shroud has to be trimmed slightly but
> that's it. It will fit between the pump stud and radiator. The offset
fan
> has been replaced with the centered one. I have an M1. I removed the
gauge
> temp sender from the large hole (it had an adaptor to make it fit) and
> installed the thermostat there (large threads) and drilled and tapped a
small
> hole for the gauge temp. sender. Very easy to do. Sorry I'm using "large
hole
> and small hole", I don't know the exact sizes off hand:)
> James
> In a message dated 4/4/2003 12:36:20 PM Eastern Standard Time,
> bpracing@worldnet.att.net writes:
>
> > Thanks for the diagram James. I'd really like to hear from all who
install
> > this on a Gen II regarding installation tips/problems. I'd also like
to
> > know if everyone gets the centered version of the fan or an offset one.
> >
> > Thanks,
> > RayB
> > http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
> >
> >
> >
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:10 EST