Can someone Email me the wiring diagram to??
Thanks
Tom
JAMEPC@aol.com wrote:
>I'm installing it on a Gen II. The shroud has to be trimmed slightly but
>that's it. It will fit between the pump stud and radiator. The offset fan
>has been replaced with the centered one. I have an M1. I removed the gauge
>temp sender from the large hole (it had an adaptor to make it fit) and
>installed the thermostat there (large threads) and drilled and tapped a small
>hole for the gauge temp. sender. Very easy to do. Sorry I'm using "large hole
>and small hole", I don't know the exact sizes off hand:)
>James
>In a message dated 4/4/2003 12:36:20 PM Eastern Standard Time,
>bpracing@worldnet.att.net writes:
>
>
>
>>Thanks for the diagram James. I'd really like to hear from all who install
>>this on a Gen II regarding installation tips/problems. I'd also like to
>>know if everyone gets the centered version of the fan or an offset one.
>>
>>Thanks,
>>RayB
>>http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
>>
>>
>>
>>
>>
>
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:10 EST