My feedback is that for a guy that is not an EE, you make a great diagram.
Rascal
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bill Nissley
Sent: Thursday, April 24, 2003 6:49 AM
To: dakota-truck@dakota-truck.net
Subject: DML: My NEW Viper Fan Wiring.
http://home.attbi.com/~billnis/dakota/viperwiring4.jpg
This is a completely new wiring diagram. It is based on the information
I received from members of this list regarding how the fan operates
differently than I originally thought. Esentially, Black is ground,
yellow is high, red is low.
This diagram has an optional kill switch and optional LED to show the
fan status. No values are given for the resistors, for the LED, I don't
know what the value should be. Like I said before I am not an electronic
engineer. :) If you know tell me.
This page has a calculator for the resistors:
http://wolfstone.halloweenhost.com/TechBase/litled_LightEmittingDiodes.h
tml
This diagram has not been tested yet, I will be doing that hopefully
this coming weekend. Please if you have an electronics background give
me your feedback.
Thanks,
Bill
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:12 EST
