I second that! I've got a CE degree and probably couldn't make a diagram
that nice. They always marked me down on my sloppy diagrams in school.
-- - Josh Lowered 2000 Dakota CC 3.9L""Rick Barnes"" <barnesrv@attbi.com> wrote in message news:001801c30a51$3ef61810$0200a8c0@sys15... > > My feedback is that for a guy that is not an EE, you make a great diagram. > > Rascal > > -----Original Message----- > From: owner-dakota-truck@bent.twistedbits.net > [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bill Nissley > Sent: Thursday, April 24, 2003 6:49 AM > To: dakota-truck@dakota-truck.net > Subject: DML: My NEW Viper Fan Wiring. > > > http://home.attbi.com/~billnis/dakota/viperwiring4.jpg > > This is a completely new wiring diagram. It is based on the information > I received from members of this list regarding how the fan operates > differently than I originally thought. Esentially, Black is ground, > yellow is high, red is low. > > This diagram has an optional kill switch and optional LED to show the > fan status. No values are given for the resistors, for the LED, I don't > know what the value should be. Like I said before I am not an electronic > engineer. :) If you know tell me. > > This page has a calculator for the resistors: > http://wolfstone.halloweenhost.com/TechBase/litled_LightEmittingDiodes.h > tml > > This diagram has not been tested yet, I will be doing that hopefully > this coming weekend. Please if you have an electronics background give > me your feedback. > > Thanks, > Bill > > >
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:12 EST
