> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> Is calibrating the speedometer to my new 4.10 gearset as easy as
> changing the
> pinion gear in the tail of the 46 RH? There are 3 different possible
> positions available on the pinion gear holder.
> Thanks,
> James
You need to change the speedometer gear. The position you then align it to
has to correspond to the number of teeth on the gear. I can get you the
part # later and tell you how it has to be aligned.
RayB
http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:13 EST