Josh Battles wrote:
>Droo,
>I don't know if they changed any dash internals, but I've got 2 200x2 PPI
>amps mounted on my firewall in front of the glove compartemnt box in my
>truck, and a small 300x1 sub amp mounted under my driver seat. To mount the
>amps to the firewall like that took some creativity and I had to route stuff
>all over the place. Depending on how creative you get, you might be able to
>get that monster Alpine amp in there, I think the combined area of the 2 PPI
>amps is a little bigger than that. I did it the day I got the truck and
>tuned it right up then...it's next to impossible to get at them without
>taking the dash off again. Depending on how you use your truck, you could
>even mount it on an angle behind the driver's seat, or take out the center
>console like Gary suggested and mount it under there. I'd have loved to get
>a single 5 channel amp, but had to split it up because of the space
>issues...
>
>
I did look up in there and it looked real packed. I'll double check though. I did come across a guy who fit a Profile <crap> amnp under his passenger seat. And That has larger dimensions than the amp I'm interested in. The only thing he did was shim the passnger seat up about 1/2" with washers. So I thinhk I may go with the Alpine and shim it up half as much and/or shave some of the fins off that'll get in the way of the adjustment bar. Which shouldn't be much at all. I'll have to figure that out when I get it.
-- -Droo Email: 03dakotaCC4.7_4x4@comcast.net"Remember: No one has the right to touch you in your bathing suit area." -Jack
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:13 EST