RE: Re: RE: Viper fan wiring for a single thermo switch.

From: Bill Nissley (bill@nissley.com)
Date: Thu May 01 2003 - 06:25:36 EDT


The wiring is set up to run the fan after the engine is off. I think if
the temp was 165 the fan would always run after the truck warmed up.
Remember that when you turn off your truck with the stock fan it doesn't
run at all. I don't think running it longer would be worth it.

Bill

-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Gary
Hedlin
Sent: Wednesday, April 30, 2003 7:19 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Re: RE: Viper fan wiring for a single thermo switch.

Is this set up to where even if the engine is off, the fan will still
run as
long as the engine temp is above 185?? If so, would there be any
problems
running a cooler thermo switch... say 165??

Gary Hedlin
President
Hedlin Web Designs
http://www.hedlin.net
""Rick Barnes"" <barnesrv@attbi.com> wrote in message
news:002801c30f30$f468c6a0$0200a8c0@sys15...
>
> Is there any danger to anything if the fan is activated by both?
>
> I think I am going to wire both to use high speed and just use low
speed
> manually. I may also put a switch to turn off the power altogether if
for
> instance, I am using the air but cruising as it is not needed then
anyway.
>
> Rascal
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bill
Nissley
> Sent: Wednesday, April 30, 2003 4:27 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Viper fan wiring for a single thermo switch.
>
>
> Here is a new diagram, Low speed is A/C controlled, High speed is
> thermoswitch.
>
> http://home.attbi.com/~billnis/dakota/viperwiring6.jpg
>
> "Bill Nissley" bill@nissley.com KG6ONB
> '98 CC SLT 2x4 5.2L V8 AT, White/Dftwd, 3" Fabtech lift, ORI
pre-runner
> light bar with PIAA 80Pro XT series lights, 32" BFG A/T's, Yellow Box
> Speedo Calib., Flowmaster Exhaust, X-2000 bed cover, F/B 50mm Throttle
> body, Pro Comp air intake, Viper electric fan, ASP crank pulley,
> Roadmaster active suspension & RBW 'LIL Rocker 5th Wheel Hitch.
>
>



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:17 EST