You can use the A/C trigger to enable the high-speed. Leave the fan on low
unless you really need the high-speed function.
- Bernd
>
> That is what I am going to use, a Black Magic #150 circuit.
> Rascal
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
> bernd@texas.net
> Sent: Monday, May 05, 2003 5:24 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Viper Fan - Factory Specs
>
>
>
> Here's the relay and parts listing:
>
> (1) Fusible Link - 50amp
> (2) Relay (both) - 30amp
> (3) Fuse - 20amp
>
> Checked with our Master Tech (also Viper Certified) and it's very easy to
> connect the Viper fan with the dual relays to the Dakota/Durango/Ram
> engines.
> Just a simple aftermarket circuit (Permacool or Flexalite).
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:18 EST