RE: Re: RE: RE: RE: Time for a little rear-end work...

From: Rick Barnes (barnesrv@attbi.com)
Date: Thu May 15 2003 - 12:41:12 EDT


Thanks Ron, I always enjoy Hawaii, in fact, I am going to look for a home
there while I am there.

Rascal

-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of scsilverdak
Sent: Thursday, May 15, 2003 12:14 PM
To: dakota-truck@dakota-truck.net
Subject: DML: Re: RE: RE: RE: Time for a little rear-end work...

I hope you have a safe and enjoyable trip!!!

Ron-
Co-owner: Muscletrucks.net
website: www.muscletrucks.net
e-mail: scsilverdak@hotmail.com

----- Original Message -----
From: "Rick Barnes" <barnesrv@attbi.com>
To: <dakota-truck@dakota-truck.net>
Sent: Thursday, May 15, 2003 12:04 PM
Subject: DML: RE: RE: RE: Time for a little rear-end work...

>
> Ok DML, I am off to paradise for about 10 days. I am heading to Waikiki.
I
> will be off the DML so it should be much more peaceful for at least a
little
> while. Take good care and I will talk to you soon.
>
> Rascal
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bernd D.
> Ratsch
> Sent: Wednesday, May 14, 2003 11:03 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: RE: RE: Time for a little rear-end work...
>
>
> On Tom's '95, no problems on the swap to an 8.75". On the '98 diff,
> there's the sensor on the diff housing. Shouldn't be a big problem, but
> would be easier to change to the HD Dana unit with HD U-Joints.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Rick
> Barnes
> Sent: Wednesday, May 14, 2003 7:50 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: RE: Time for a little rear-end work...
>
>
>
> The one on my 98 is giving up too...what would you do Bernd?
>
> Rascal
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Tom Slick
> North
> Sent: Wednesday, May 14, 2003 9:32 PM
> To: DML
> Subject: DML: Time for a little rear-end work...
>
>
> Well, I've been putting it off as long as possible, but the rear-end on
> my Dak is apparently going south...
>
> I'm trying to decide whether to just get the bare min. done to it just
> to keep it on the road, or should I go ahead and get the whole rear-end
> rebuilt, or should I get an 8 3/4" rear-end... Money is an issue, but
> I
> may be willing to spend the extra money if justifiable...
>
> Thanks in advance!
> Tom "Slick" North
> 96 Dodge Dakota 5.2L RC
>
>
>
>



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:19 EST