for the people that are wanting a firmer shifts from the superchips!
Go and do it RIGHT and get a trans-go shift kit! Come on people really!
jeesh!
----- Original Message -----
From: "Bob Mankin" <bob@coralfarms.com>
To: <dakota-truck@dakota-truck.net>
Sent: Saturday, May 24, 2003 5:33 PM
Subject: RE: DML: Re: RE: Re: RE: Group Buy on the Superchips
>
> Firm it up, maybe move it slightly. That's a far cry from the 400-600 rpm
> bumps people are wanting.
>
> Bob
>
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Bernd D.
> > Ratsch
> > Sent: Saturday, May 24, 2003 12:48 PM
> > To: dakota-truck@dakota-truck.net
> > Subject: RE: DML: Re: RE: Re: RE: Group Buy on the Superchips
> >
> >
> >
> > But recalibrating the line pressure does help out on the shift.
> >
> > - Bernd
> >
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
> > Bob Mankin
> > Sent: Saturday, May 24, 2003 8:41 AM
> > To: dakota-truck@dakota-truck.net
> > Subject: RE: DML: Re: RE: Re: RE: Group Buy on the Superchips
> >
> >
> >
> >
> >
> > > -----Original Message-----
> > > From: owner-dakota-truck@bent.twistedbits.net
> > > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Kyle
> > > Vanditmars
> > > Sent: Friday, May 23, 2003 10:32 PM
> > > To: dakota-truck-moderator@bent.twistedbits.net
> > > Subject: Re: DML: Re: RE: Re: RE: Group Buy on the Superchips
> > >
> > >
> > > No kidding... bastards over at superchips - and all those similar
> > > places. My question is, why couldn't they simply have the
> > > transmission stuff as an
> > > option while you're programming the truck? Would it kill
> > > them to have an
> > > OBD-I and -II version of the program on the same programmer
> > > either? I would
> > > probably buy one for my '92... but NOOOOOO.
> > >
> > >
> >
> > They probably see limited market for the OBD-I stuff and I doubt you
> > could put it in the same box because of the differences in the specs.
> >
> > As for the tranny shifts, the program is designed around a stock or
> > close to stock truck. In that app bumping the tranny shift points
> > doesn't make sense because the cam and intake is already rolling over.
> > All you're doing with more rpms there is making noise.
> >
> > Bob
> >
> >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:21 EST