Hi Jeff,
I already installed BellTech Schackles/Hanger Kit in the rear 4" lower and Spindles also by BellTech in front 2" lowered.
Additional I want to lower the truck 2" front/rear.
Have a nice day
Stefan
dakota-truck@dakota-truck.net schrieb am 24.05.03 19:38:15:
>
>
> Stefan,
>
> I mentioned it before and I would say that with your situation now I would
> really look into the Western Chassis lowering kit. I believe sport trucks
> direct has the kit. I like it better since it uses new spindles (won't
> effect factory ride much, if any) and it has hangers in teh rear (same idea
> but also better than blocks). I believe over the long run you would be much
> happier with this kit.
>
> They way I look at it is you have gone so far with your truck you might as
> well finish it off with the best parts.
>
> Good Luck,
> Jeff Durling
> ----- Original Message -----
> From: <stebel@web.de>
> To: <dakota-truck@dakota-truck.net>
> Sent: Saturday, May 24, 2003 12:19 PM
> Subject: DML: lowering coils question
>
>
> >
> > Hi guys,
> >
> > I am searching for lowering coils because the ones I ordered by another
> guy didnīt come to germany. They have been stolen at the habour in Miami.
> > When I search the web site of BellTech I only find some lowering coils 2"
> for the V8 GEN II Dakota. Will they also fit on a V6 Dakota?
> > What I think is that I will lower the truck with that coils on a V8 2 "
> and on a V6 maybe 1.8", right? Or did the have another dimension?
> >
> > Have a nice weekend
> > Stefan
> >
> ____________________________________________________________________________
> > Jetzt bei WEB.DE FreeMail anmelden = 1qm Regenwald schuetzen! Helfen
> > Sie mit! Nutzen Sie den Serien-Testsieger. http://user.web.de/Regenwald
> >
>
____________________________________________________________________________
Jetzt bei WEB.DE FreeMail anmelden = 1qm Regenwald schuetzen! Helfen
Sie mit! Nutzen Sie den Serien-Testsieger. http://user.web.de/Regenwald
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:21 EST