Stefan,
Sorry about that. I didn't realize it when I saw the pictures. Wow, you want
to go really low.....cool! I would say try www.tirerack.com like other have
mentioned. I know Eibach makes springs but don't know if they have what you
need. There is one other place that most likely has them but you need to be
aware of quality issues that they have been known to have. You can try AIM
Industries www.truckn-store.com.
Hope that helps you out some
Jeff Durling
----- Original Message -----
From: <stebel@web.de>
To: <dakota-truck@dakota-truck.net>
Sent: Monday, May 26, 2003 1:22 AM
Subject: Re: DML: Re: lowering coils question
>
> Hi Jeff,
>
> I already installed BellTech Schackles/Hanger Kit in the rear 4" lower and
Spindles also by BellTech in front 2" lowered.
> Additional I want to lower the truck 2" front/rear.
>
> Have a nice day
> Stefan
>
> dakota-truck@dakota-truck.net schrieb am 24.05.03 19:38:15:
> >
> >
> > Stefan,
> >
> > I mentioned it before and I would say that with your situation now I
would
> > really look into the Western Chassis lowering kit. I believe sport
trucks
> > direct has the kit. I like it better since it uses new spindles (won't
> > effect factory ride much, if any) and it has hangers in teh rear (same
idea
> > but also better than blocks). I believe over the long run you would be
much
> > happier with this kit.
> >
> > They way I look at it is you have gone so far with your truck you might
as
> > well finish it off with the best parts.
> >
> > Good Luck,
> > Jeff Durling
> > ----- Original Message -----
> > From: <stebel@web.de>
> > To: <dakota-truck@dakota-truck.net>
> > Sent: Saturday, May 24, 2003 12:19 PM
> > Subject: DML: lowering coils question
> >
> >
> > >
> > > Hi guys,
> > >
> > > I am searching for lowering coils because the ones I ordered by
another
> > guy didnīt come to germany. They have been stolen at the habour in
Miami.
> > > When I search the web site of BellTech I only find some lowering coils
2"
> > for the V8 GEN II Dakota. Will they also fit on a V6 Dakota?
> > > What I think is that I will lower the truck with that coils on a V8 2
"
> > and on a V6 maybe 1.8", right? Or did the have another dimension?
> > >
> > > Have a nice weekend
> > > Stefan
> > >
> >
____________________________________________________________________________
> > > Jetzt bei WEB.DE FreeMail anmelden = 1qm Regenwald schuetzen! Helfen
> > > Sie mit! Nutzen Sie den Serien-Testsieger.
http://user.web.de/Regenwald
> > >
> >
>
>
>
____________________________________________________________________________
> Jetzt bei WEB.DE FreeMail anmelden = 1qm Regenwald schuetzen! Helfen
> Sie mit! Nutzen Sie den Serien-Testsieger. http://user.web.de/Regenwald
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:21 EST