I doubt it will help but check under the vacuum motor (or whatever it's
called) and see if the connector is loose or the vacuum line itself coming
out of the t-right next to the resevoir is off. THese are on the firewall
just off the middle on the passenger side. Other than that it would have to
be the tranny. Most likely a sensor was left off.
Jeff Durling
----- Original Message -----
From: "mike kulczycki" <dakota1994@hotmail.com>
To: <dakota-truck@dakota-truck.net>
Sent: Wednesday, May 28, 2003 9:48 PM
Subject: DML: Cruise control doesn't work...
>
> the cruise control on my 94 all of a sudden doesn't work. i just had the
> transmission rebuilt because of torque converter failure that was under
> warranty. now it doesn't work. i called the place, they said that if the
> speed sensor wasn't plugged in it wouldn't work, but neither would the
> speedo. and that works. i checked the fuse, looks good. what else
should
> i look for?? is there something else on the trans that could have been
> screwed up?? it worked great right before the trans went. now it does
> nothing... any help is appreciated... it is a V6, 2wd, auto...
>
>
>
> Mike K
> 94 SLT,CC,239,2wd,auto
> 95 Sport,RC,360,5-speed
> http://www.hornok.com/zig
>
> _________________________________________________________________
> The new MSN 8: smart spam protection and 2 months FREE*
> http://join.msn.com/?page=features/junkmail
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:22 EST