Wasn't the 8 1/4 were only used in GenI, GenII an early GenIII that I
understood... I am not all knowing but that was my understanding, that when
the 3.92 became the 4WD std. that the 9 1/4 was used in the GenIII 4WD(98
and up)?
Bill Day
billday@consolidated.net
AIM - BadManD73
'95 Ext Cab 3.9Mag 4x4 Flame Red
----- Original Message -----
From: "scsilverdak" <scsilverdak@hotmail.com>
To: <dakota-truck@dakota-truck.net>
Sent: Thursday, June 12, 2003 9:29 PM
Subject: DML: Re: Rear Axle
>
> From what I've seen of the R/T's I've worked on.........
>
> They use a 9 1/4 rearend similar to those used in the Durango.
>
> Standard issue Dak's .....4wd included
> use the 8 1/4 rearend...
>
> Ron-
> Performance consultant
> Muscletrucks.net
> ----- Original Message -----
> From: <DodgeDe@cs.com>
> To: <compuserve@dakota-truck.net>
> Sent: Thursday, June 12, 2003 8:21 PM
> Subject: DML: Rear Axle
>
>
> >
> > Well, I'm on the way to getting the truck done for Carlisle. Large parts
> of
> > it are Orange (tor red) and the shaker is on. But the axle is bent.
> >
> > Question is the rear axle for an 2000 R/T the same as all gen III
Dakota.
> I
> > don't always trust the junk yard when the say it will work on a R/T as
> > sometimes the R/T isn't listed.
> >
> >
> > Related question Can anyone E-mail the axle change section from the
> service
> > manual. I don't want any surprises.
> >
> >
--- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.488 / Virus Database: 287 - Release Date: 6/5/03
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:27 EST