i was sent this e-mail from K&N for anyone who is interested:
Mr. Couriel,
The Z stud which replaces the stock bolt is part # 08008 and has an MSRP of
$11.14. It is 1/4 X 20 and 4 1/4" long and can be ordered from your local
K&N dealer.
Please refer to http://www.knfilters.com/dealinq.htm
Sincerely,
John Pacheco
K&N Engineering
Technical Support
-----Original Message-----
From: Gabriel A. Couriel [mailto:BigGabe@FIUFIJI.com]
Sent: Monday, June 16, 2003 8:10 AM
To: tech@knfilters.com
Subject: Dodge Ram "s" bolt
i have heard that K&N makes a bolt for the throttle body that replaces the
stock bolt on the Ram 1500's equipped with the 5.2L or 5.9L V8's. what is
the part number for that bolt, and what is the MSRP?
thank you,
Gabriel Couriel
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Patrick
Delgado
Sent: Sunday, June 15, 2003 8:00 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: Anyone have a spare S-Bolt?
For anyone else that needs one and wants it ready-made, the k&n air
charger(off road use only open element) kit for the Rams(5.2/5.9) comes with
one. There's even a part # for it but I don't have it. A call to k&n would
do the trick. BTW, that's the kit I used for the dak and it worked great.
-- --Patrick Delgado
2000 Dakota RC 5.9 R/T; 9 psi Powerdyne w/ 7-rib pulley, Gatorback belt, F&B
stage I TB, TV cable adj., Homebrewed K&N 0920 behind foglight, MAP boost
bypass, IAT relocation, MSD6BTM, MSD 8.5 superconductors, 3923's, MP
computer, NO CAT, katbox, full Hotchkis kit, Bilsteins, 255/50 kuhmo's and
275/50 nitto's, powerslots/QS pads, Jason cap. In possession but not in
position; Belly pan plate and traction bars.
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:28 EST