RE: RE: RE: RE: Viper Fan Blows Relays

From: Rick Barnes (barnesrv@attbi.com)
Date: Wed Jun 25 2003 - 20:28:05 EDT


groovy

-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bernd D.
Ratsch
Sent: Wednesday, June 25, 2003 8:37 PM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: RE: RE: Viper Fan Blows Relays

Yup

-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Rick
Barnes
Sent: Wednesday, June 25, 2003 12:31 PM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: RE: Viper Fan Blows Relays

Is that one EACH for low and high speeds Bernd?

Rascal

-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bernd D.
Ratsch
Sent: Wednesday, June 25, 2003 3:18 PM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: Viper Fan Blows Relays

What relay are you using (amperage). If you don't know, email me the
P/N and I can find out for you. (You should be using two 40amp relays
for the low/high speed operation)

- Bernd

-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
JAMEPC@aol.com
Sent: Wednesday, June 25, 2003 7:22 AM
To: aol@dakota-truck.net
Subject: DML: Viper Fan Blows Relays

I used Mopar relays for the wiring of my Viper Fan. I'm on my second
Mopar
relay, it's the one that controls the high speed so apparenty there are
too
many amps flowing through it. What are the Mopar relays rated at? How
about
Bosch relays? Anyone else have blown high speed relays?

What's amazing is that even with just low speed working, the temprature
stays
at 180 degrees WITH the air on! Thats here in FL where it's been in the

upper 80's to low 90's. If I idle for over a 5 minuets, the temp. will
rise to
200 -205 max. When high speed works, it never breaks 200 even at
constant idle. Thanks, James



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:30 EST