The sanding drums will do the job. But you'll want to smooth it out after
they get thru with it. Try a wire honing wheel for that.
mm
----- Original Message -----
From: "Chris Reck" <Roadkill47@attbi.com>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Friday, June 27, 2003 1:23 PM
Subject: DML: TB Grinding question
>
> I am preparing my V8 TB shaving of all the rough edges. I did OK cutting
> off all the towers, but now I'm having a problem finding the right bit to
> grind everything smooth. I have a corded Dremmel-wannabe that I paid $10
> for, but it goes to 24k RPM. Does anyone know the right bit to properly
> grind down the hardened aluminum on the TB?
>
> Thanks!
>
> Chris Reck
> Bloomington, IL
>
> '99 Dakota Sport + CC 4x4 V6 (Deep Amethyst)
> Autolite 3923, 7.5mm Bosch plug wires, Jet Stage 1 Chip, Custom K&N 6x9
air
> intake, Rancho RSX shocks (4), Pioneer full audio system, BF Goodrich
> 32x11.5r15 T/A KO tires
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:31 EST