he could use a 47RE, or a 727
Aaron Wyse
----- Original Message -----
From: "Gabriel A. Couriel" <BigGabe@fiufiji.com>
To: <dakota-truck@dakota-truck.net>
Sent: Friday, June 27, 2003 10:12 AM
Subject: RE: DML: Re: Re: Are there parts available for a stroker rebuild?
>
> uhhh... and when your tranny blows out the back of the truck, what are ya
> gonna replace it with??? ;)
>
> Gabe Couriel
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of scsilverdak
> Sent: Friday, June 27, 2003 10:47 AM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: Re: Re: Are there parts available for a stroker
> rebuild?
>
>
>
> Greg's correct in his decision to go for a
> 390 or 408 stroker instead of a $2500.00 + stroker v6 !!
>
> Muscletrucks offers the 390 / 408 stroker kits for $1700.00 complete.
>
> All that's needed is balancing and block machine work.
>
> My 3.9 will get a Forged piston and Eagle rod short block in the next
12-18
> months............
>
> I'm trying to see if I can build it up to handle the Supercharger @ 10lbs
> boost
> and a 100 hp shot of nitrous........
>
> I'd like to get my Dak to pull a 400+ hp
> Dyno run and run a QTR mile pass in the 13's
>
> Ronald Bruce Taylor, Jr
> Performance consultant
> Muscletrucks.net
> ----- Original Message -----
> From: "greg conner" <dodgeboy93@hotmail.com>
> To: <dakota-truck@dakota-truck.net>
> Sent: Friday, June 27, 2003 9:38 AM
> Subject: Re: DML: Re: Re: Are there parts available for a stroker rebuild?
>
>
> >
> > I've spoke with stroker kits.com a few times. the crank is 1900 alone
and
> > will stay that pricey unless they can get someone to form the crank out
of
> a
> > different material. I love my v6 and its cool surprising the v8's out
> > there. But when I do build a new motor ya better beleive I'm not gonna
> use
> > a 1900 dollar billet crank. the 350 buck cast 4in 360 crank will do me
> just
> > fine ;)
> >
> >
> >
> > Greg Conner
> > 1996 RC
> > 3.9 hybrid
> >
> >
> >
> >
> >
> > >From: "Aaron Wyse" <awyse@sw.rr.com>
> > >Reply-To: dakota-truck@dakota-truck.net
> > >To: <dakota-truck@dakota-truck.net>
> > >Subject: DML: Re: Re: Are there parts available for a stroker rebuild?
> > >Date: Sat, 28 Jun 2003 07:40:36 -0500
> > >
> > >
> > >Chrysler shows same part numbers for 5.2 & 3.9 internals
> > >same thing with most 5.9 & 8.0 motors.
> > >
> > >I thought mopar had a stroker crank available for the 3.9 at one time,
> but
> > >if not, I'd check the prices of the rods and pistons from elsewhere and
> see
> > >how much strokerkits wants for just the crank; see if it's cheaper to
> ,make
> > >the kit yourself, or if they're giving yuo a decent deal by ordering
all
> > >the
> > >parts from them.
> > >Aaron Wyse
> > >1994 RC WS 2.5L 5spd
> > >
> > >----- Original Message -----
> > >From: "Kyle Vanditmars" <kylevan@telus.net>
> > >To: <dakota-truck-moderator@bent.twistedbits.net>
> > >Sent: Thursday, June 26, 2003 11:06 PM
> > >Subject: DML: Re: Are there parts available for a stroker rebuild?
> > >
> > >
> > > >
> > > > ""RWP"" <randpark@-no-spam-pacbell.net> wrote in message
> > > > news:bdgacq$3j8$1@bent.twistedbits.net...
> > > > >
> > > > >
> > > > > Question 1: Are there parts are available for a stroker rebuild of
a
> > >stock
> > > > > 3.9L Magnum V-6?
> > > >
> > > > As Mike said, strokerkits.com has 'em. They are (to put it in the
> > > > vernacular,) BIG BLING. It would be cool to have a 4.9L V6, though.
> > > >
> > > > > Question 2: Can it be done with existing stock parts from other
> Dodge
> > > > > Engines?
> > > >
> > > > You could theoretically use 318 pistons since it's the same engine
> with
> > >a
> > > > couple bores lopped off... although probably not, as the skirt might
> > >have
> > >to
> > > > be different. The kit that Mike listed is very complete, it has the
> > >billet
> > > > crank, H-beam rods, .030" (I think) Forged pistons, rings, and all
> > >bearings.
> > > >
> > > >
> > > >
> > >
> >
> > _________________________________________________________________
> > Tired of spam? Get advanced junk mail protection with MSN 8.
> > http://join.msn.com/?page=features/junkmail
> >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:31 EST