Pic of Josh's truck:
http://barryoliver.home.insightbb.com
Choose Hobbies > Truck pictures...
>>> BigGabe@fiufiji.com 06/30/03 02:48PM >>>
hey josh, how much did you pay for your tires, and where did you get them?
also, can i get a pic of your truck with them on? i've been looking all
over town for Yoko Avis S/T's, and haven't found any... i'll have to order
them.
i was debating between the 245/70's and the 235/70's... but i haven't made
up my mind yet.
thanks,
Gabe Couriel
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Josh
Battles
Sent: Monday, June 30, 2003 1:41 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Re: Been Awhile (HELP!)
""Nate & Brenda Johnson"" <nbjohnson@networld.com> wrote in message
news:002d01c33f25$f5c87200$8b70bbd0@nbjohnson...
>
> Hey List! Been a looooong time since I've been subscribed! (Over a year?)
> Of course when I've got a question where do I turn? (Hey Aaron H. If your
> out there...)
> Question -- I need to get my rotors turned and I can't get the stinkin'
> things off! I've soaked em with WD40, pounded on em, everything I can
think
> of... Anybody got any hints or trick on getting these darned things off?
> The axle bolt doesn't need to come off does it? Never had to on any other
> vehicle except one, and I don't really want to put everything back
together
> to run down to the hardware store and buy me a new socket unless I have to
> :-(
>
> Thanks,
> Natedak2k
> '00 4X4 Club Cab, 4.7L
>
It's a 7mm allen to remove the calipers and then the rotors should just
slide off the hub... At least they did on my 2000... Did you try cracking
them with a dead blow mallet right on the flat area of hub part of the
rotor? That should usually pop them off.
-- - Josh Lowered 2000 Dakota CC 3.9L
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:32 EST