That is understandable. But if you are just trying to stop the odometer
from registering mileage you would probably have to disconnect the speed
sensor at the tranny because the veichle computer would still memorize the
mileage for the electronic display and still show actual mileage once it is
reconnected. The memory is not in the dash cluster but in the computer.
Could you run without the speed sensor input?
----- Original Message -----
From: "Bob Tom" <tigers@bserv.com>
To: <dakota-truck@dakota-truck.net>
Sent: Friday, July 04, 2003 7:53 AM
Subject: Re: DML: Possibility of unhooking the speedometer
>
> At 11:19 PM 7/3/03 -0500, you wrote:
> >I am not sure about starting but the truck will probably run so badly it
> >wont be very drivable and if equipped with 1 of the electronic
transmissions
> >it will not shift out of first gear.
>
> I run a Gen II pcm on my Gen III 5.2L at the track. Because of the
> major changes in how sensors for the dash are wired between the Gens,
> the Gen III gauges do not work (no input signals received) and that
includes
> the speedometer/odometer. So from that point of view, I don't have any
> evidence of running the 1/4 :-) BTW, it does start and shifts :-)
>
> Bob
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:35 EST