I was also thinking he mixed the B&M syn fluid with
what was already in the trans....
--- "Bernd D. Ratsch" <bernd@texas.net> wrote:
>
> You should be using ATF+4 (TSB from DC - use ATF+4).
> The ATF+4 uses
> additives that are proprietary to DC only and is
> also a semi-synthetic
> fluid. All '00+ models should only be using ATF+4 -
> use anything else
> (and they find out) and the warranty is void on the
> transmission.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On
> Behalf Of
> jdurling@bellsouth.net
> Sent: Saturday, August 02, 2003 10:46 PM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: RE: Trans fluid
>
>
>
> Is that stuff ATF+3 or 4 rated? If not that could be
> part of the
> problem. Dodge transmissions are very specific about
> the fluid put into
> them. ATF+3 is what came in it but you can also now
> use the newer ATF+4
> in it and be fine.
>
> Jeff Durling
> ----- Original Message -----
> From: <randypwoods@juno.com>
> To: <dakota-truck@dakota-truck.net>
> Sent: Saturday, August 02, 2003 10:58 AM
> Subject: Re: DML: RE: Trans fluid
>
>
> >
> >
> > Correct. I B&M synthetic fluid.
> >
>
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:45 EST