You should be using ATF+4 (TSB from DC - use ATF+4). The ATF+4 uses
additives that are proprietary to DC only and is also a semi-synthetic
fluid. All '00+ models should only be using ATF+4 - use anything else
(and they find out) and the warranty is void on the transmission.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
jdurling@bellsouth.net
Sent: Saturday, August 02, 2003 10:46 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: RE: Trans fluid
Is that stuff ATF+3 or 4 rated? If not that could be part of the
problem. Dodge transmissions are very specific about the fluid put into
them. ATF+3 is what came in it but you can also now use the newer ATF+4
in it and be fine.
Jeff Durling
----- Original Message -----
From: <randypwoods@juno.com>
To: <dakota-truck@dakota-truck.net>
Sent: Saturday, August 02, 2003 10:58 AM
Subject: Re: DML: RE: Trans fluid
>
>
> Correct. I B&M synthetic fluid.
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:45 EST