i don't have to remove the clutch fan because i'm only doing the crank
pulley. the only issue i have is running the throttle cable through... i'm
not sure where that goes, and does there have to be an adjustment made to
the cable?
Gabe Couriel
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Chad Evans
Sent: Wednesday, August 06, 2003 12:03 PM
To: dakota-truck@dakota-truck.net
Subject: DML: Re: V8 TB and Underdrive install
the TB is a piece of cake. The underdrive pulley is to bad.
I put one on gary's truck. Wasn't bad just had trouble getting the nut of
the clutch fan. that's what 163,000 miles of rust will get you. but other
than that it was pretty easy. 1.8 hrs doesn't seem to long.
----- Original Message -----
From: "Gabriel A. Couriel" <gcouriel@bellsouth.net>
To: "DML" <dakota-truck@dakota-truck.net>
Sent: Wednesday, August 06, 2003 11:05 AM
Subject: DML: V8 TB and Underdrive install
>
> about how long does it take to install a V8 TB? also, how long does it
> take
> to install an underdrive crank pulley? my mechanic wanted 1.8 hours to
> install the two. i don't think it'll take that long to do, but how long
> did
> it take, and how hard was it?
>
> thanks,
>
> Gabriel A. Couriel
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:45 EST