You can order the cams and intake either together, or separately, from
your local Dodge dealership. The HO manifold is a straight swap except
on the '02+ models - PCV hose needs to be changed (longer) and some
brackets don't fit properly anymore - only minor modification required
to factory brackets on the '02+ models.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Kyle
Vanditmars
Sent: Tuesday, August 12, 2003 11:06 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: 4.7L Intake manifold
Jayson Woodruff wrote:
>
> Okay, I think I want to upgrade. I hear it's a pretty easy change.
> Is
> the HO the only way to go? Where's a cheap good place to get one?
> Results? Anyone change out the manifold only (and not the other HO
parts)?
>
The only place I know of off the top of my head would be KRC
Performance. They have a 4.7L page at:
http://www.krcperformance.com/newcontent/47page.html
I THOUGHT they did intake manifolds for the 4.7 as well, but apparently
not, now that I look at the page. The HO manifold is apparently the
only way to go. The best bet to find one would be a wrecked Grand
Cherokee Overland (get the heads while you're at it.)
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:46 EST