Yes, this piece as well as a Holley pump
will be finding it's way under the hood
and in my tank very soon......
Ron-
'01 Dakota Sport RC, 4X4, 3.9
Street ,Strip, and Show
----- Original Message -----
From: "Chad Evans" <hemidak@msn.com>
To: <dakota-truck@dakota-truck.net>
Sent: Wednesday, August 13, 2003 2:49 PM
Subject: DML: Re: do I need regulator with Holley fuel pump?attn Bernd
>
>
> ask bernd he has the part number for the rising rate fuel pressure
regulator
> from
> Croky bell engineering.
> suppose to be a very quality piece.
>
> oops I found the site, but bernd says these are a very good piece, and I
> believe that ron taylor is going to get one also for his supercharged v6
> dak.
>
>
> http://www.bellengineering.net/fmu2020.html
>
> ----- Original Message -----
> From: <Pukeloser@aol.com>
> To: <dakota-truck@dakota-truck.net>
> Sent: Wednesday, August 13, 2003 12:54 PM
> Subject: DML: do I need regulator with Holley fuel pump?
>
>
> >
> > Hey all,
> >
> > I'm finally about to get around to installing the Holley fuel pump on
my
> > 95
> > 390 stroker and was wondering if I am going to need a pressure regulator
> > since
> > the holley puts out twice the pressure of the stockl pump. If so can
> > anyone
> > recommend a good one and is it hard to install?
> >
> > John S
> >
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:46 EST