RE: injectors

From: Bernd D. Ratsch (bernd@texas.net)
Date: Tue Aug 19 2003 - 19:11:53 EDT


Use the aftermarket Ford Motorsports (or Accel) - $200 for the set and
they flow better than stock. :)

- Bernd

-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of garett
Sent: Tuesday, August 19, 2003 4:57 PM
To: dakota-truck@dakota-truck.net
Subject: DML: injectors

i put my truck in the shop because i have been having a problem where
when i come to a stop and put it in park the truck wants to die. well
they told me that some of the injectors are pretty dirty and they can
clean them, but one of them is probably going to have to be replaced.(so
if any of you ever experience this, now you know what to look for).
they told me it would cost about 220 bucks to replace 1 injector. that
sounds pretty steep to me, its been a while since i looked at injectors
but i was thinking it costs somewhere around $300 to buy a set of
injectors?

ok so my question is, how hard is it to replace the injectors? if its
not bad id rather do it myself... save that money and buy something else
with it. :) also would it be ok to upgrade them even though i am not
running a SC or upped my compression? who makes good injectors(both
stock and performance)?



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:47 EST