Couldn't tell you why Tony. The impedance is different and they lean
out at mid throttle (tried this on a few Daks and Rams (99 or older).
What's the impedance of the green ones you're using? There are
different models for the Design-III injectors.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Tony
Cellana
Sent: Wednesday, August 20, 2003 6:13 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: RE: RE: injectors
Uh, tell that to my 13.099 @ 103.41 stock cam/head R/T (NA). I'm using
the green 19 lbers.
Balanced they flowed 19.8 as per 5-O Motorsport.
TonyC
-----Original Message-----
From: Bernd D. Ratsch <bernd@texas.net>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Wednesday, August 20, 2003 6:46 AM
Subject: RE: DML: RE: RE: injectors
>
>Design-III's don't work properly on the Design-II Dodges.
>
>- Bernd
>
>-----Original Message-----
>From: owner-dakota-truck@bent.twistedbits.net
>[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Chad
>Evans
>Sent: Tuesday, August 19, 2003 9:34 PM
>To: dakota-truck@dakota-truck.net
>Subject: Re: DML: RE: RE: injectors
>
>
>
>question here.
>under the bosch #3 design injectors 24lbs navigator or the "cobra"
>ones. it states that they can be used on 88-99 on the navigator and
>00-03 on the cobra ones.
>
>are they that better of a design and could I use them on my 5.2. if I
>were to get the fuels rails from a newer year r/t ?
>
>
>----- Original Message -----
>From: "Bernd D. Ratsch" <bernd@texas.net>
>To: <dakota-truck@dakota-truck.net>
>Sent: Tuesday, August 19, 2003 9:17 PM
>Subject: RE: DML: RE: RE: injectors
>
>
>>
>> Hehehehe...what he said. ;)
>>
>> - Bernd
>>
>> -----Original Message-----
>> From: owner-dakota-truck@bent.twistedbits.net
>> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
>> B1LLYW@aol.com
>> Sent: Tuesday, August 19, 2003 8:43 PM
>> To: aol@dakota-truck.net
>> Subject: Re: DML: RE: RE: injectors
>>
>>
>>
>> In a message dated 8/19/2003 9:39:24 PM Eastern Standard Time,
>> kenneth@berntsen.cc writes:
>>
>>
>> > Hey Bernd
>> >
>> > Do you by chance have the part number for the FMS injectors
>> > memorized?
>> >
>>
>> check out this site:
>>
>> http://www.fiveomotorsport.com/Injector_SetsDODGE.asp
>>
>> Bill White - http://www.bionicdodge.com
>>
>> '03 Ram 1500 QC 4x4 Hemi Off-Road
>> '95 Dakota CC 4x2 - under construction
>>
>>
>>
>>
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:47 EST