I like tossing fuel on the Flames........LOL.......(between Bernd and Bob)
Wonder what would happen if we locked them both in the same room!.....(I
wonder who'd survive)........
The DML version of "SURVIVOR"
heheheheheehhehehe.........LOL
Ron-
'01 Dakota Sport RC, 4X4, 3.9
Street ,Strip, and Show
----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@dakota-truck.net>
Sent: Thursday, August 21, 2003 6:36 PM
Subject: RE: DML: injectors
>
> And contrary to "other opinions"...they do work very well.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
> scsilverdak
> Sent: Thursday, August 21, 2003 4:56 PM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: injectors
>
>
>
> Ok, so how about a Boost Proportional Regulator for better fuel
> control.......hehehehe!
>
> http://www.bellengineering.net/fmu2020.htm
>
> This is what's going to replace the FMU I'm currently running, it's much
> better design and easily adjusts to achieve the fuel curve I need.
>
> Ron-
> '01 Dakota Sport RC, 4X4, 3.9
> Street ,Strip, and Show
>
>
>
> ----- Original Message -----
> From: "Bob Mankin" <bob@coralfarms.com>
> To: <dakota-truck@dakota-truck.net>
> Sent: Thursday, August 21, 2003 4:14 PM
> Subject: RE: DML: injectors
>
>
> >
> > Personally I wouldn't put "better" and "rising rate regulator" in the
> > same sentence, but that's just me ;-)
> >
> > Bob
> >
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of
> > scsilverdak
> > Sent: Thursday, August 21, 2003 12:24 PM
> > To: dakota-truck@dakota-truck.net
> > Subject: Re: DML: injectors
> >
> >
> >
> > I still need to install a Rising Rate regulator, for better fuel
> > control.
> >
> > I also need to have the PCM flashed for better fuel mapping and to fix
>
> > the timing issues once and for all....
> >
> > Ron-
> > '01 Dakota Sport RC, 4X4, 3.9
> > Street ,Strip, and Show
> >
> >
> >
> > ----- Original Message -----
> > From: "Bob Mankin" <bob@coralfarms.com>
> > To: <dakota-truck@dakota-truck.net>
> > Sent: Thursday, August 21, 2003 1:49 PM
> > Subject: RE: DML: injectors
> >
> >
> > >
> > > Ron, the '01 and later stuff idles in closed loop. Another little
> > > known twist. That's why it handles the bigger injectors better than
> > > the older controllers.
> > >
> > > Bob
> > >
> > > -----Original Message-----
> > > From: owner-dakota-truck@bent.twistedbits.net
> > > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of
> > > scsilverdak
> > > Sent: Thursday, August 21, 2003 10:16 AM
> > > To: dakota-truck@dakota-truck.net
> > > Subject: Re: DML: injectors
> > >
> > >
> > >
> > > I'm running the Lincoln Navigator injectors (24lb/hr) in my
> v6...........
> > >
> > > No problems at all except it goes full rich at 3800 under boost, but
>
> > > it idles just fine and doesn't run rich at all at idle.....
> > >
> > > Ron-
> > > '01 Dakota Sport RC, 4X4, 3.9
> > > Street ,Strip, and Show
> >
> >
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:48 EST