And contrary to "other opinions"...they do work very well.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
scsilverdak
Sent: Thursday, August 21, 2003 4:56 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: injectors
Ok, so how about a Boost Proportional Regulator for better fuel
control.......hehehehe!
http://www.bellengineering.net/fmu2020.htm
This is what's going to replace the FMU I'm currently running, it's much
better design and easily adjusts to achieve the fuel curve I need.
Ron-
'01 Dakota Sport RC, 4X4, 3.9
Street ,Strip, and Show
----- Original Message -----
From: "Bob Mankin" <bob@coralfarms.com>
To: <dakota-truck@dakota-truck.net>
Sent: Thursday, August 21, 2003 4:14 PM
Subject: RE: DML: injectors
>
> Personally I wouldn't put "better" and "rising rate regulator" in the
> same sentence, but that's just me ;-)
>
> Bob
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of
> scsilverdak
> Sent: Thursday, August 21, 2003 12:24 PM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: injectors
>
>
>
> I still need to install a Rising Rate regulator, for better fuel
> control.
>
> I also need to have the PCM flashed for better fuel mapping and to fix
> the timing issues once and for all....
>
> Ron-
> '01 Dakota Sport RC, 4X4, 3.9
> Street ,Strip, and Show
>
>
>
> ----- Original Message -----
> From: "Bob Mankin" <bob@coralfarms.com>
> To: <dakota-truck@dakota-truck.net>
> Sent: Thursday, August 21, 2003 1:49 PM
> Subject: RE: DML: injectors
>
>
> >
> > Ron, the '01 and later stuff idles in closed loop. Another little
> > known twist. That's why it handles the bigger injectors better than
> > the older controllers.
> >
> > Bob
> >
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of
> > scsilverdak
> > Sent: Thursday, August 21, 2003 10:16 AM
> > To: dakota-truck@dakota-truck.net
> > Subject: Re: DML: injectors
> >
> >
> >
> > I'm running the Lincoln Navigator injectors (24lb/hr) in my
v6...........
> >
> > No problems at all except it goes full rich at 3800 under boost, but
> > it idles just fine and doesn't run rich at all at idle.....
> >
> > Ron-
> > '01 Dakota Sport RC, 4X4, 3.9
> > Street ,Strip, and Show
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:48 EST