Above 160 degress ECT, yeah.
Think about it. Older model with 24# idling cold makes your eyes water. '01
with 24# idles at or near stoich(I can send you a mpeg of my wideband
readout if you like).
Why do you think that is?
Bob
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Bernd D.
Ratsch
Sent: Thursday, August 21, 2003 3:35 PM
To: dakota-truck@dakota-truck.net
Subject: RE: DML: injectors
Uhhhh...the older models do to Bob. Would you like me to post the Open
and Closed loop operations for you?
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bob Mankin
Sent: Thursday, August 21, 2003 12:49 PM
To: dakota-truck@dakota-truck.net
Subject: RE: DML: injectors
Ron, the '01 and later stuff idles in closed loop. Another little known
twist. That's why it handles the bigger injectors better than the older
controllers.
Bob
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of scsilverdak
Sent: Thursday, August 21, 2003 10:16 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: injectors
I'm running the Lincoln Navigator injectors (24lb/hr) in my
v6...........
No problems at all except it goes full rich at 3800 under boost, but it
idles just fine and doesn't run rich at all at idle.....
Ron-
'01 Dakota Sport RC, 4X4, 3.9
Street ,Strip, and Show
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:48 EST