OBD-2 CODE SCANNER WILL BE NEEDED TO RETRIEVE THE CODE, THERE'S NO CHARGE AT
AUTO ZONE TO DO IT ........
Ron-
'01 Dakota Sport 3.9 4WD
Street,Strip,and Show
----- Original Message -----
From: "Brian Tong" <thedude807@hotmail.com>
To: <dakota-truck@dakota-truck.net>
Sent: Friday, September 12, 2003 9:31 PM
Subject: DML: retrieving codes from a 99...
>
> My check engine light came on after driving pretty hard last night, and it
> idles rough. My guess is the bellypan gasket. I haven't done any real
> mechanical inspection yet, but just for the heck of it, I wanted to check
> the code(s) it threw.
>
> Yes I read the Archive and FAQ and all that.
>
> It tells me to cycle the iginition on/off three times in five seconds and
> my
> odo will display the codes. Nothing, it just reads 75658. If that's the
> code, that's creepy because that's exactly how many miles are on my truck.
>
> So the other way it says to do it is hold the trip button in and turn the
> key on. So I did that and it did all of the cool lights and gauge dance
> stuff, but then it just reads 75658 again.
>
> My Check Engine light is still on, so there HAS to be a code. I guess I
> could just go to autozone, but I'd really like to know how to do this
> myself.
>
> Brian
>
> '99 CC 5.2L 4x4
>
> _________________________________________________________________
> Get 10MB of e-mail storage! Sign up for Hotmail Extra Storage.
> http://join.msn.com/?PAGE=features/es
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:58 EST