Yes punch, these are intened for only one time useage. just take a pice of
the line over to napa or some other parts store and you should be able to
get proper replacements very cheap $0.25 each or so.
Bill Day
billday@consolidated.net
AIM - BadManD73
'95 Ext Cab 3.9L Mag 4x4 Flame Red
http://www.dodgetruckworld.com/BadMan/
----- Original Message -----
From: "Punch" <crash2000@sympatico.ca>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Thursday, October 02, 2003 8:55 PM
Subject: Re: DML: how-to for compression fittings?
>
>
> ""Bernd D. Ratsch"" <fasstdak@swbell.net> wrote in message
> news:so0onvcqs7cmj8e1cq99n2qfq3s0c465f4@4ax.com...
> >
> >
> > Put the nut on the line, then the ferrul (ball), insert the line into
> > the fitting, and then gently tighten the nut down. Do NOT use a lot
> > of pressure...just slightly more than hand tight on the nut otherwise
> > you'll crimp the line and won't get an accurate signal.
>
> these ferrul's, are they a one time use item, i bought this used and the
> line doesn't fit into the ferrul?
>
>
--- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/03
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:02 EST