Just make sure you torque the bolts properly and go around the manifold
10-times. (3-4 times as I've seen some do won't work properly as the
bolts are "Torque to Yield" - they stretch.)
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of E Frank
Ball
Sent: Sunday, October 05, 2003 9:14 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: Belly Pan Gasket Problem??
On Fri, Sep 12, 2003 at 01:15:35AM +0000, A. S. wrote:
}
} Frank,
} Thanks! for the websites. I'm going to really look things over
before I
} decided whether or not I want to attempt this myself. Any info/tips
you
} have after you complete the job would be great!! There's always those
} little snags that others forget to mention in their write-ups. That's
} usually what costs the most time and causes the most frustration. }
Good luck!!! } --Aaron-- } 95 DSRC 4x4 V6
Aaron asked for a followup to my replacing the plenum gasket in the
intake manifold, which I did about 3 weeks ago.
<snip>
E Frank Ball efball@efball.com
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:02 EST