Thank you!.....very much!
I've actually got a new goal and I think 350RWHP and 400+RWTQ is well with
in reach for next year........
The 3.9 I'm using is currently still bone stock as far as the intake, heads,
cam and shortblock!....
A new intake is currently on it's way from Texas, after being reworked
by Bernd Ratsch.....
Scott @ GSMOTORSPORTS has agreed to build a custom set of billet fuel rails
for this project....my intake will be used as the mock up for the v6 fuel
rail kit,...........he may offer them after he finishes making the first set
thru his website, no word on that for sure yet.
I've got a set of wonderfully ported v6 heads that'll match the intake
perfectly sitting here waiting installation......Thanks to Bernd again on
those!
Marty @ KRC Performance had Comp Cams grind me a custom blower cam for this
engine.......thanks Marty!
Chad's making a few calls on a custom Superchips programmer, since no
PCM flash is currently available.
I'm also installing a billet FMU from BELL Engineering and a Holley
255lph in-tank pump so the nitrous can be tuned better......
and I've got one more trick for getting it off the line at the track
a little better........a set of YUKON 4:56's for both diffs from Randy's
ring and pinion.........I'll be ordering those soon!
hehehe........I've got a well thought out plan here that I just need to
execute it!
Ron-
01'Dakota Sport 3.9 4WD
Street,Strip,and Show!
----- Original Message -----
From: "Michael Maskalans" <mike-lists@tepidcola.com>
To: <dakota-truck@dakota-truck.net>
Sent: Tuesday, October 21, 2003 10:06 AM
Subject: Re: DML: Ron's Mopar Muscle Article
>
>
> On Tuesday, October 21, 2003, at 12:40 AM, Gary Hedlin wrote:
>
> > *This message was transferred with a trial version of CommuniGate(tm)
> > Pro*
> >
> > OK....I finally got off my dead a$$ and scanned the Mopar Muscle
> > article
> > that featured Ron's dyno pull at carlsile.
> >
> > The article is at http://www.scsilverdak.com/rons.pdf (the 2 pages that
> > matter annyway)
>
> 290 HP out of a 3.9 ain't too shabby. well done!
>
> <g>
> --
> Michael Maskalans '98 Dakota SLT CC 4x4 318
> details here: <http://mike.tepidcola.com/dak/>
> mobile.612.618.4652 campus.585.274.2246 fax.954.697.0487
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:04 EST