Uh, just to avoid showing partiality to any particular brand, it should be
noted that ported throttle bodies are also available from the Fastman
www.thefastman.com . An even less expensive alternative for a V6 is a used
stock V8 throttle body. On a basically stock engine, none of them will
offer a cost-effective improvement.
RayB
http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
> -----Original Message-----
>
> The F&B 48mm or APS Precision 48mm will be your best bet combined with a
> good free flowing cold air intake.....
>
> I have the F&B Billet 50mm on mine with the Blower and Nitrous,
> on a NA 3.9,
> A 48mm will be just right!......The stock TB is a 44 or 46mm
> so this will aid in breathing....
>
> Stay away from the TB spacers, they do absolutely nothing for power ot
> torque!
>
> Ron-
> 01'Dakota Sport 3.9 4WD
> Street,Strip,and Show!
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:10 EST