"Michael Maskalans" <dml@tepidcola.com> wrote in message
>
> sorry for the lack of clarity:
> I was "talking about the springs that hold the pads into the calipers,
> and not the spring that goes on the outside of the caliper"
>
> I'd have had to grind off rivet heads and then somehow peen over the
> numbs on the new pads to hold them on. without making the new pads
> into
> little-bits-of-pad-material-no-longer-stuck-to-their-mount-in-a-single-
> useful-piece. That's the exact problem I was correcting with the front
> brake job =)
> --
> Michael Maskalans <http://mike.tepidcola.com/dak/>
Ahh.... I thought we were talking about the spring that hooks into the
outside edge of the caliper and presses against the mount point on the
steering knuckle. Sorry...
-- - Josh Lowered 2000 Dakota CC 3.9L www.geocities.com/lenny187/dakota.html
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:12 EST