Very gentle application of a flat screwdriver should be fine. You just
need to lift out one edge. If ur worried, try the blunt end of a
plastic pen (so you don't lose the cap)...it should slide past the plug
and into the diff case, then you can pry out the plug.
Don't worry, just be careful and gentle :)
Kevin
Bob Tom wrote:
>
> For those that have removed the rubber plug on diff. cover,
> what did you use to remove it? Any learned tips regarding
> not damaging it during removal or installation? As always,
> thanks.
>
> Bob
>
--
Kevin Sellstrom, W6KTB E-Mail:ksellstr@softcom.net
***Wilton, California***
'99 Dodge Dakota CC, 4x4, 5.2,
'69 Dodge D200, 4x2, 318,
Also: '83 Volvo 244Ti, '85 Volvo 244, '68 Volvo 122S, '98 Specialized
Rockhopper A1FS
This archive was generated by hypermail 2b29 : Sun Feb 01 2004 - 16:29:50 EST