Just a stab in the dark, but could it be the switch on
the handle?
I know I've had problems in the past with my high
beams. I switch them on, the light on the dash shows
them being on and my headlights go out. (!!) Switch
them back to low beam and they work. Switch them to
high and they work again. Dirty switch I think.
Haven't had time to take it in and have them look at
it.
--- droo <03dakotacc4.7_4x4@comcast.net> wrote:
>
>
> Well. It seems my wipers are having an intermitent
> problem of not working.
> I originally thought the first time they didn't work
> was because the relay
> got stuck because of the unusual cold. But today I
> got in my truck and
> washed the windows with the wipers. The wipers come
> on and cycle off
> automatically. Then some wiper fluid dropped down
> the windshield so I go to
> hit the wipers top clean it and nothing happens. I
> checked the fuse and its
> fine. I popped the hood to check out the relay. I
> swapped it with the
> starter relay to make sure. Still nothing. I could
> hear the relay click as
> well. Any ideas? its 2003 with 14,500 miles.
>
> --
> -Droo
>
> http://www.grandroyal.org/dakota
=====
Phil
2000 4x4 CC 4.7L
This archive was generated by hypermail 2b29 : Sun Feb 01 2004 - 16:29:51 EST