You can answer that one yourself; can you cite an application where it's
appropriate to run the injector static?
To make sure one is comparing apples to apples, injectors should always be
listed as xx lbs/hr @ 3 Bar(or whatever pressure you flowed them at) and xx%
duty cycle. Without the full picture it's easy to get confused and then you
end up with people adding 30% fuel delivery to an application that doesn't
need it.
Bob
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
> Bernd D. Ratsch
> Sent: Wednesday, February 25, 2004 3:55 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: RE: RE: RE: RE: Re: Fuel Injector Questions
>
>
> So who's right and who's wrong now? (Five-O-motorsports had
> sent them out for cleaning and flow-testing for us). May
> want to ask Bruce Holt who tests them for him.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
> Bob Mankin
> Sent: Wednesday, February 25, 2004 9:49 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: RE: RE: RE: Re: Fuel Injector Questions
>
>
>
> You probably tested them static. They could meet those
> numbers on a static test.
>
> Bob
>
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf
> Of Bernd D.
> > Ratsch
> > Sent: Wednesday, February 25, 2004 4:11 AM
> > To: dakota-truck@dakota-truck.net
> > Subject: DML: RE: RE: Re: Fuel Injector Questions
> >
> >
> >
> > We also had a set of Red '01 injectors tested (at 43.5psi)...21#
> > injectors.
> > (You can ask Matt Bonnette on that - he's got the data
> sheet from the
> > flow-test).
> >
> > - Bernd
> >
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bob
> > Mankin
> > Sent: Tuesday, February 24, 2004 9:16 PM
> > To: dakota-truck@dakota-truck.net
> > Subject: DML: RE: Re: Fuel Injector Questions
> >
> >
> >
> > Tony, we tested some of those at RC Engineering a few weeks
> back and
> > the reds are 19# when tested at 3 bar pressure. I think the
> confusion
> > comes in with the factory 49-50 psi in the trucks which then puts
> > their output at close to 21#.
> >
> > Bob
> >
>
This archive was generated by hypermail 2b29 : Mon Mar 01 2004 - 00:34:04 EST