I use idea #1 with a K/N flat filter on my 2K.
TonyC
-----Original Message-----
From: james.zito@ps.ge.com <james.zito@ps.ge.com>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Monday, April 05, 2004 8:06 PM
Subject: DML: K&N mounting
>
>OK currently getting ready to install a home made cold air intake system on
>the 6 banging Dak, and I have 2 plans running around in my head.
>
>First idea, use the stock air box and run some metal dryer duct from the
>inlet to the box and to the empty spot on the passenger side of the
>radiator. Benefits this will provide some ram air effect and cool the
>intake air. Drawback uses the stock filter element.
>
>Second idea, use a large cylindrical K&N element and route the duct to
>general area. Benefits more efficient filtration and reduced air temps.
>Drawback how to keep the filter and filter end of the duct from flopping
>around.
>
>Looking for advice on how to mount the K&N.
>
>
>Jim
>03 CC Red Dak
>
This archive was generated by hypermail 2b29 : Sat May 01 2004 - 12:00:16 EDT