OK currently getting ready to install a home made cold air intake system on
the 6 banging Dak, and I have 2 plans running around in my head.
First idea, use the stock air box and run some metal dryer duct from the
inlet to the box and to the empty spot on the passenger side of the
radiator. Benefits this will provide some ram air effect and cool the
intake air. Drawback uses the stock filter element.
Second idea, use a large cylindrical K&N element and route the duct to
general area. Benefits more efficient filtration and reduced air temps.
Drawback how to keep the filter and filter end of the duct from flopping
around.
Looking for advice on how to mount the K&N.
Jim
03 CC Red Dak
This archive was generated by hypermail 2b29 : Sat May 01 2004 - 12:00:16 EDT