Sorry...didn't try to get you confused.
You "should" be able to use the grant adapter from a Ram (or even the
Dakota)...just check the splines and the flat spot on the adapter and
make sure it matches up. (Heck, I've tried an '04 Ram wheel on a Gen-II
and it fit...right along with a '84 Ram wheel on my Dakota.)
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of RayB
Sent: Thursday, April 22, 2004 6:54 PM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: RE: RE: Grant Steering Wheels on Gen II's
Ok I'm confused Bernd.....why are you telling me about air bags and Gen
IIIs? The question I responded to was about a '92 Dak vs. a '91 Dak
and
neither have air bags.
RayB
http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
> -----Original Message-----
> Ray,
>
> I've found that the adapter for the older Ram's works on the Dakota's
> as they all have the splined w/single notch shaft. However, the
> clockspring and airbag are going to require a custom adapter as it
> puts the wheel a bit too close for comfort on the clockspring.
>
> Been searching myself for the Gen-III.
>
> - Bernd
>
> -----Original Message-----
> Well a '91 is a Gen II Dak so it seems logical that the '92 would be
> the same. Grant probably just never tried it on anything newer than a
> '91. You know how neglected our Gen IIs are in the aftermarket. Does
> their kit also
> fit '87 - '91? Just find out their return policy in case you have a
> problem and you should be good to go.
>
> RayB
> http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
>
>
> > -----Original Message-----
> > I have a Grant steering wheel from one of my previous cars, and I
> > wouldn't mind seeing it in my truck. Grant sells install kits but
> > they end at '91. Can I use this in my '92? What is the difference?
> >
> > Travis
> > '92 Dak 5.2 4x4
>
This archive was generated by hypermail 2b29 : Sat May 01 2004 - 12:00:17 EDT