Suitable enough. My 408 is plumbed that way.
TonyC
-----Original Message-----
From: John Neff <jndneff@texas.net>
To: Dakota Mailing List <dakota-truck@dakota-truck.net>
Date: Wednesday, April 28, 2004 9:26 PM
Subject: DML: Valve cover vent
>
>I wasn't able to pick up a barbed port for my new air hat today and
>remembered that there is an unused 3/8" port on drivers side of my M1
>manifold. Does anyone know if this would be a suitable place to hook up the
>valve cover vent or will there be too much vacuum resulting in the engine
>sucking oil from the valve cover. My gut tells me it will be fine since the
>PCV line attaches in the same location on the passenger side plus there are
>baffles inside the valve cover. But, I thought it wise to ask before I cut
>the line and tried it out.
>
>Thanks,
>John
>http://jndneff.home.texas.net/dakota/dakota.html
>
>
This archive was generated by hypermail 2b29 : Sat May 01 2004 - 12:00:18 EDT