We had the 220 running on a '01 (last of the Mopar PCM's) and on a '95 408
with Mopar PCM - no problems.
- Bernd
----- Original Message -----
From: "Tony Cellana" <acellan1@tampabay.rr.com>
To: <dakota-truck@dakota-truck.net>
Sent: Wednesday, May 12, 2004 2:06 PM
Subject: DML: Re: Re: Cam help
>
> IMO, the 220 may be a bit big for a MP PCM. It'll likely require a custom
> flash to get it to run politely.
> TonyC
>
> -----Original Message-----
> From: DaPurpleRT <dapurplert@dakota-durango.com>
> To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
> Date: Wednesday, May 12, 2004 2:13 PM
> Subject: DML: Re: Cam help
>
>
> >
> >
> >I meant to send this directly to Bill White, BUT, if anyone else wnats to
> >chime in, that'd be great. :)
> >
> >-Ryan
> >99 DA RC R/T
> >
> >----- Original Message -----
> >From: "DaPurpleRT" <dapurplert@dakota-durango.com>
> >To: <dakota-truck@dakota-truck.net>
> >Sent: Wednesday, May 12, 2004 12:07 PM
> >Subject: DML: Cam help
> >
> >
> >>
> >> Hey Bill,
> >>
> >> Sent an email via the KRC site, but never got a repsonse, I knew
however
> >> you'd respond, so here's a copy of the email I sent:
> >>
> >> Hello. I am looking at buying a one of a couple of your cams secondhand
> or
> >a
> >> comp cam. I will be using 1.7 RRs and am looking at this custom ground
> KRC
> >> cam:
> >>
> >> 1 Custom ground KRC cam .456 lift 210/220 i/e dur at .050 (.485 lift
with
> >> 1.7's) 110 LSA, has maybe 300 miles on it, great alternative to the
Mopar
> >> R/T cams.
> >>
> >> Also, looking at a KRC 220 cam.
> >>
> >> Finally looking at a Comp Cam with these specs:
> >>
> >> 1 Comp Cams .512 lift cam (with 1.6 rocker, 1.7's makes it a .544 lift)
> >has
> >> about 15,000 miles on it, good. Check Comps website for specs.
> >>
> >>
> >> Now my truck is in the shop waiting for a cam, and when it get sout,
the
> >> mods will be as follows:
> >>
> >> Comp. bumped to 9.5:1
> >> 4BBL M1
> >> 52MM F&B TB
> >> MP PCM
> >> MP 2400 Stall
> >> 180 Tstat
> >> UD pullies
> >> Mopar headers\Bullet muffler
> >> Gutted cat
> >> .030 over forged KB pistons
> >> Eagle SIR connecting rods
> >> MSD Digi 6
> >> Jacobs Nitrous MasterMind
> >> NX Kit - 150 shot
> >> K&N Gen 2
> >>
> >>
> >>
> >> Now, I am looking to be FULLY streetable and daily driveable, this is
my
> >> main concern! I'll have stock heads for now but will be getting 2.02
R/T
> >> heads within the next year or so. Again, I want no issues sitting at a
> red
> >> light, AC blasting, and stereo jammin.
> >>
> >>
> >>
> >> Which cam do you think is right for me?
> >>
> >>
> >>
> >> Thanks, Ryan
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
>
>
This archive was generated by hypermail 2b29 : Tue Jun 01 2004 - 10:59:12 EDT