RE: RE: ASP vs. March

From: Gabriel A. Couriel (gcouriel@bellsouth.net)
Date: Wed Jun 02 2004 - 10:28:57 EDT


the only time i really have any charging issues (no real problems) are when
i'm at the stop light, with the A/C on and lights on.

if u want, go with a higher output alternator... something like a 120Amp, if
you have a 90Amp, or a 136Amp.

Gabriel Couriel

-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Peter Grace
Sent: Tuesday, June 01, 2004 11:56 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: RE: ASP vs. March

Ugh! Most of my commute is in stop-and-go. What's the bad thing about
being stuck with the electric fan? Is it not as powerful or something?

Pete

Bernd D. Ratsch wrote:
> I do...ASP Underdrive pulley with A/C and BlackMagic 150 electric fan
> conversion. Only thing I'd recommend...don't get stuck in rush hour
traffic
> for too long.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Peter Grace
> Sent: Sunday, May 30, 2004 9:23 PM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: Re: DML: RE: ASP vs. March
>
>
>
> Can you run underdrive pulleys with AC and fan? Or do you have to
> replace the regular fan with an electric and then remove your AC system?
>
> Speaking of which, anyone know what kind of electric fan system I aught
> to look into for a '97 3.9?
>
> Thanks,
> Pete
>
>
> Bernd D. Ratsch wrote:
>
>>I've installed both and there's really no difference in between the
>>pullies (just the material and finish) - performance gains are the
>>same in both cases.
>>
>>- Bernd
>>
>>-----Original Message-----
>>From: owner-dakota-truck@bent.twistedbits.net
>>[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of j c
>>Sent: Sunday, May 30, 2004 5:10 PM
>>To: dakota-truck@dakota-truck.net
>>Subject: DML: ASP vs. March
>>
>>
>>
>>I was wondering if someone with an ASP underdrive
>>pulley and someone with a March underdrive pulley can
>>measure the diameters for me. I'd like to compare the
>>sizes before I buy one (and go for the smaller one):)
>>
>>Thaks for your help,
>>David Butolli
>>
>>
>>
>>
>>__________________________________
>>Do you Yahoo!?
>>Friends. Fun. Try the all-new Yahoo! Messenger.
>>http://messenger.yahoo.com/



This archive was generated by hypermail 2b29 : Thu Jul 01 2004 - 00:15:16 EDT