What are you trying to do Don?
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Michael
Maskalans
Sent: Friday, June 18, 2004 5:20 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: RE: Deep electronic question..
On Jun 18, 2004, at 17:14, Tony Cellana wrote:
> You might also be able to hang a counter circuit off the RWSS. Once
> you hit
> "X" number of pulses per second, you could enable/disable the planned
> electronics.
Unless you could somehow tap into the cruise enable/disable, which is
probably completely internal to the PCM and thus for all intents and
purposes untapable, this is probably going to be the only real option.
Of course you could probably put some sort of a sensor on the
speedometer itself - maybe a microswitch glued to the speedo at 40mph
that the needle would hit and trip - of course it'd be damn tough to
make the speedo work above that speed, then, and pegging it's travel
would probably not do the motor that moves it any good =)
-- Michael Maskalans <http://mike.tepidcola.com/> mobile.612.618.4652 home.585.935.7129 fax.360.364.3930
This archive was generated by hypermail 2b29 : Thu Jul 01 2004 - 00:15:17 EDT